Posh Broadcast
-
K&M 23850 Desktop Microphone Arm
Microphone desk arm features 3/8″ or 5/8″ threaded connector for recording studios and multimedia workstations with new innovative desk clamp. Easy to position and suitable for microphones up to max. 0.8 kg. Having a clamping range of 0 to 48 mm, the clamp is suitable for a wide mounting spectrum. The stable metal construction with high-quality plastic inserts ensures a secure and strong hold. Intelligently shaped clamping parts allow the clamp to be used on smooth surfaces and round tubes. The microphone arm can also be attached with the optionally available table flange 23855.
-
K&M 23860 BK Microphone desk arm
The microphone boom has a 3/8″ or 5/8″ threaded connector in a modern design with a new innovative table clamp for easy placement of a microphone in a studio or multimedia workstation. The 6m long, internally guided microphone cable has a 3-pin XLR connector. Microphones up to max. 1.5 kg are easily held in any position. The clamping width ranges from 0 to 48 mm. The stable metal construction with high-quality plastic inserts ensures a secure and strong hold. Shaped clamping parts allow the clamp to be used on smooth surfaces and round tubes.
-
K&M 26085 MICROPHONE STAND
Lightweight rod, very stable and sturdy. Can be used with cable or radio microphone, in studio and especially LIVE.
Excellent stability, easy to carry, the weight of the microphone does not affect the rod block, useful and convenient height adjustment with block made to handle.
-
Laserworld CS-4000RGB FX
The Laserworld CS-4000RGB FX is an analog-modulated RGB diode laser system with a total output power of up to 4,000 mW and a guaranteed output power of 3,500 mW. The red laser source has an output power of 850 mW / 635 nm, the green 850 mW / 520 nm, and the true blue laser source has an output power of 1’800 mW / 450 nm. The diode laser sources sorgen for strong laser beams. The projector has good beam specifications with a beam diameter of about 3 mm and a beam divergence of 1.4 mrad. The galvo system has a scanning speed of up to 30 kpps@4°.
-
Led light ON AIR – DM
DM ON AIR Light
LED ON AIR light, with RJ45 connection that allows remote control, 12 volt DC, 450 mA external power supply, AC switching with external relays.
Cable connection on the back.
Dimensions: cm 38,3 W x 13,5 H x 4,
-
MA-2050 MILLENIUM ARM DESKTOP MICROPHONE
Desktop microphone arm for recording studios and multimedia. Adjustable with spring supports.
The MA 2050 does its job very well even with heavy microphones.
-
Mic Arm DS100 Millenium
Microphone arm – Flexible microphone stands for use on the table. (8). With adjustable arm 480 mm.
-
Mic Arm Yellowtec MiKA YT3205
As a golden mean among the available sizes of m! Ka microphone arms, the size M arm is the all-purpose weapon that can be integrated into any configuration. The arm of this size is ideal for attaching microphones to your own workplace and in all areas where the distance between the arm’s fixation and the speaker does not exceed 78.7 cm.Equipped with a two-color LED On Air signal, the m! Ka On Air microphone arm M is not only used for the precise positioning of a microphone, which it makes possible thanks to its weight. Thanks to its on-air indicator, the microphone arm also allows various states to be signaled.
-
MIC2200 V2 BEHRINGER Microphone Pre-amplifier
Give your digital recordings some old-school warmth with the Ultragain Pro MIC2200. Run your mics through a real 12AX7 tube to add that warmth so often missing from DAW recordings. Designed for the studio, the MIC2200 features phantom power, 12dB high-pass filter, phase inversion, parametric equalizer, and LED meter. XLR and 1/4″ inputs and outputs provide flexibility so you can connect any microphone or instrument.
-
MIC2200 V2 BEHRINGER Valve Microphone Amplifier
Give your digital recordings some old-school warmth with the Ultragain Pro MIC2200. Run your mics through a real 12AX7 tube to add that warmth so often missing from DAW recordings. Designed for the studio, the MIC2200 features phantom power, 12dB high-pass filter, phase inversion, parametric equalizer, and LED meter. XLR and 1/4″ inputs and outputs provide flexibility so you can connect any microphone or instrument.
-
Microphone Holder M-THE T.BONE -K&M
A product that is solid, very resistant with its upper part in rubber that offers the right elasticity.
The grip on the microphone is firm, equipped with a nut of unscrewable attachment that allows the adaptability to any microphone stand.
-
Microphone Holder S-THE T.BONE-K&M
The support is compact and effective, excellent construction with excellent quality of materials used.
It adapts to any microphone stand, both with large and small connection. (adapter included).