The 5518 includes a full-featured RBS/RBDS generator at no additional charge. The generator supports dynamic PS. It can be controlled via the 5518 presets and an ASCII terminal server that can be connected to automation to support, for example, displaying title and artist.The built-in, defeatable ITU BS412 multiplex power controller acts on all outputs to meet even the most stringent European government regulations include a full spectral protection of subcarriers and RDS/RBDS regardless of the amount of composite limiting.A 10 MHz frequency reference input allows the stereo pilot tone frequency to be locked to GPS or another high-accuracy frequency standard. This improves the performance of single-frequency networks in areas where coverage of the transmitters overlaps.The stereo encoder’s stereo sub-channel modulator can operate in normal double sideband mode and in an experimental compatible single sideband mode (SSB/VSB) that is offered to enable users to compare and assess the two modes.Analog Fallback to Digital control that allows Silence Sense to switch the active input from Analog to Digital if silence is detected in the analog input signal but not on the digital input signal. This function works vice versa as well on both analog and digital AES input.The 5518 can delay its output by as much as 16 seconds. This delay can be used as the diversity delay in Digital Radio installations.At the transmitter side you’ll be pleased by its three separate remote control ports – GPI contact closures, RS232 serial and built-in Ethernet for TCP/IP networks. The serial and Ethernet ports are supported by the supplied 5518 PC Remote Control application. This Windows® 2000/XP/Vista/7/8/10 allows you to access all 5518 features and allows you to archive and restore presets, automation lists, and system setups (containing I/O levels, digital word lengths, GPI functional assignments, etc.)The SNMP (Simple Network Management Protocol) features allow you to monitor your Optimod’s status and to send Alarm notifications via your Optimod’s Ethernet connection to your network. API features allow custom third-party applications (including automation systems) to recall presets, view status and set the controls.

The 5518’s feature set fully exploits the processor’s DSP and computer-based control architecture. To ensure absolute accuracy, you can automatically synchronize the clock to an Internet timeserver. It has a cool-running, energy-efficient switching power supply and uses the latest dual-core DSP chip technology from Freescale Semiconductor.

Features

• View and export PS (Program Service) and RT (Radio Text) messages
• Supports the most popular LED signage formats
• Tuning from 64MHz – 108MHz in 100kHz steps
• Provides support for those who choose colors and fonts
• Front panel display of RDS presence, Signal Strength, PI Code, RT, PS and more

Specifications

Tuning range

64.0MHz – 108.0MHz in 100kHz steps

Receiver sensitivity

10μV for a solid text display

Antenna input

The 75 ohm input (‘F’ connector) can accept downlead from the rooftop antenna, a simple two-wire dipole or random wire, depending on signal strength and reception conditions.

LED signal output

DB9 male and female serial data connectors; the communication baud rate is automatically set when the sign type is selected.

*LED Sign sold separately

Supported signature protocols

Supplied by Inovonics-; NEOPlex Technology; Alpha

Characters and colors

The options are selected via the 402 menus, depending on the capabilities of the sign used.

402 Power Requirements

12VDC at 125mA. A “brick type” (inline) switching power supply is provided to match the target AC mains voltage.

Mounting options

An optional rack adapter accepts up to three INOmini modules in a 1U, 19″ rack space, or the 402 can be easily attached to any convenient surface with two small screws.

Dimensions and weight

1.6 “H x 5.5 “W x 5.5 “D; 4 pounds shipping weight

Features

Frequency Response: 49Hz – 43kHz

Max SPL: 108dB

LF/Mid Range Drive Unit: 5″ (130mm)

HF Drive Unit: 1″ (25mm) Soft Dome

LF/Mid Range Power: 50 Watt RMS

HF Power: 25 Watt RMS

THD: < 0.7%

Balanced Input: XLR, 20 kOhm

Unbalanced input: 1/4″ Jack, 10 kOhm

AUX Link: 1/8″ Jack, 10 kOhm

AUX Link output: 1/8″ jack

HF EQ Settings: -1.5dB HF Cut / Neutral / +1.5dB HF Boost

Crossover Frequency: 2.3kHz

Dimensions: H300 x 184 x 238mm

Weight: 7.2kg

Features

4.5″ (115mm) composite low-frequency transducer

Ultra-low-mass 1″ (25mm) high-frequency transducer with silk dome

Acoustic port with rear focus for superior low-frequency reproduction

Optimized internal reinforcement that suppresses resonance

High and low frequency adjustment controls

Front-panel volume control for speakers and headphone amplifier

Bluetooth pairing button

50 watts (25 W/side), Class AB bi-amping

Protection from RF interference, output current limiting, overheating, transients and subsonics

Amplifier’s “soft start” function eliminates pops at power-up

Internal power supply with IEC connector

Power switch with On / Off LED

Bluetooth 5.0 stereo wireless input

Balanced 1/4″ TRS, 1/8″ unbalanced and RCA inputs

Built-in stereo headphone amplifier with 1/8″ output on front panel

Dimensions: 163 x 180 x 241mm

Weight (per pair): 5.9kg

ERIS E5 PRESONUS

Active studio monitor set

5.25″ (133mm) woofer with Kevlar cone

1″(25mm) silk cone tweeter

Power: Class AB power amplifiers with 45 / 35 W

Frequency range: 53 – 22,000 Hz

Gain control

Input impedance: 10 kOhm

Mid-range controls: Peak EQ, 1 kHz, +/- 6 dB

Treble controls: Cow tail filter, 4.5 kHz, +/- 6 dB

Switchable high-pass filter: 80 Hz – 100 Hz

Acoustic-space switch: -2 dB, -4 dB

Crossover frequency: 3 kHz

Maximum continuous SPL 102 dB

Input: XLR and jack (balanced) and RCA (unbalanced)

Shielded against RF interference

Power on delay

Output current limiting

Overheat, transient and subsonic protection circuitry

Dimensions (W x D x H): 178 x 198 x 260 mm

Weight: 4.63 kg

Includes: 2 monitors (1 pair)

Additional information

Speaker size 1x 5.25″

Amplifier power per unit (RMS) 70 W

Magnetically Shielded No

Analog XLR Input Yes

Analogue Input (Jack) Yes

Analogue Input (Mini Jack) No

Analogue Input (RCA) Yes

Digital Input No

Manual Frequency Correction Yes

ERIS E3.5

Active studio monitors

3.5″ woofer with Kevlar cone

1″ silk cone tweeter

Frequency range: 80 – 20,000 Hz

Sound pressure level: 100 dBA SPL (peak)

Inputs: TRS jacks (L/R symmetrical)

RCA pair (L/R)

Treble control

Bass control (-6 to +6dB each)

AUX input on front (stereo mini jack) for smartphones etc.

Front-side headphone jack (stereo mini jack)

Volume control on front with on/off switch and status LEDs

Class AB power amplifier (2x 25 W sine wave)

Shielded against HF interference

Power on delay and output current limiter

Overheat protection and subsonic filter

Includes mini jack cable (TRS to TRS), 1.5 m, adapter cable (TRS mini jack to 2 x RCA), 1.5 m, and left speaker to right speaker connection cable

Dimensions (H x W x D): 210 x 141 x 162 mm

Weight: 2.9 kg

Additional information

Speaker size 1x 3.5″, 1x 1″

Amplifier power per unit (RMS) 25 W

Magnetically shielded No

Analog XLR input No

Analogue Input (Jack) Yes

Analogue Input (Mini Jack) Yes

Analogue Input (RCA) Yes

Digital Input No

Manual Frequency Correction Yes