Stereo Power Amplifier

With low rack installation depth of just 308 mm

Power: 2x 190 W at 4 Ohm, 2x 120 W at 8 Ohm, 1x 380 W at 8 Ohm bridged (@1 kHz, THD <= 0.1%)

Frequency range: 20 – 20,000 Hz

Damping factor: >120

Inputs: XLR, jack (balanced) and RCA

Outputs: Speaker Twist and binding posts

Protective circuits: DC, short circuit protection, overheating protection

Switchable limiter

Mains voltage: 230 V, 50 Hz

Dimensions (W x D x H): 482 x 308 x 88 mm

Rack size: 19″ / 2 RU

Weight: 8.6 kg

Elegant, compact, efficient and flexible – this is no ordinary PAR product. an ordinary PAR product. ETC’s Source Four PAR goes beyond with its rigid aluminum die-cast housing and acclaimed Source Four lighting technology. Changing beam angles is easy: Source Four PAR features a set of four snap-in lenses mounted on a cold swivel ring. This means no more rotating the lamp with the porcelain holder often cracked. And when you need a new lamp, use your stock of Source Four HPL (no need to(no need to carry a large stock of expensive PAR64 lamps). 

Encoder Section RDS

RDS encoder fully compatible with UECP EBU SPB490 v7.05, CENELEC (Europe) and NRSC (America);

Full support for all RDS services, static and dynamic services;

UEPC ports (2 serial, 4 TCPIP, 4 UDP);

n.8 Data Sets;

n.10 EON + Main PS for each Data Set;

Integrated RDS decoder;

FM tuner with RDS decoder (optional);

Data Set Switch managed by UECP/SNMP/REST/HTTP/ASCII PARSER/TXT FILE/GPI;

Easy to interface to any kind of automation system (UECP/SNMP/REST/HTTP/ASCII PARSER/TXT FILE);

RDS can autonomously take data from Radio Automation System (PS/RT/RT+/TA/MS);

Easy quick configuration of the RDS page;

RDS 2.0 ready.

GUI and Monitoring

Fully programmable via Web GUI, all browsers are supported;

Simple and intuitive GUI, supported by all devices (PC, notebook, tablet, smartphone, etc.);

Easy and configurable GUI;

Multi-user web GUI;

Map with geolocation of the device (required RX sat or fixed coordinates);

Web GUI with information bubbles;

FM tuner monitoring (as an option);

RDS Groups data analyzer;

GUI with LED measurement bars.

Communication and management

Ethernet/USB/RS232/GPIO connections;

Easy WiFi access – USB WiFi hot spot to directly connect a wireless device to RDS E3 and RDS E5;

SNMP V2c;

Possibility to configure up to 3 NTP Servers (V1, V2, V3, V4);

Ability to send email to 4 recipients and set up 3 different SMPT servers;

IPV4 and IPV6 support (3 IPV4 and 3 IPV6 addresses);

N°2 RS232 for UECP commands;

6 GPI and 4 Relay Out (all GPIOs are fully programmable from the GUI);

HTTP, FTP, SNMP, SMTP, UDP, TCP support;

Alarms via: TRAP (SNMP), email (SMTP), GPO, HTTP;

External GPS support (Time, Date and Geolocation);

uSD card for clone function, for maintenance and easy replacement of a failed unit;

Configuration import and export function;

PRESET, with upload/save/import/export functions;

24/7 Log with export function;

6 levels of access rights management;

Easy configuration page setup with info connection schemes;

REST API available to manage the device;

ASCII PARSER interface for simple command line settings;

SAMBA SHARE function to connect and receive data from an external PC;

Multi-user concurrent access.